Owner's Manual

12 Setting Up Dell Online Diagnostics
• Running Online Diagnostics simultaneously in graphical user interface (GUI)
and command line interface (CLI) modes is not supported.
Setup and Diagnostic Requirements
Set Online Diagnostics to run diagnostics locally.
Minimum System Requirements
• A minimum of 256 MB RAM.
• A minimum of 110 MB free space on the system drive (
C: on Windows
operating systems or
/opt on Linux operating systems.)
• A supported operating system installed on your Dell system. See Supported
Operating Systems.
• The latest device drivers and firmware installed, so as to run diagnostics on
RAID controllers, RAID-attached hard drives, tape drives, tape
autoloaders, and tape libraries.
NOTE: See the documentation that accompanied your device for more
information or access the latest drivers and firmware from support.dell.com.
NOTE: For a list of the latest drivers and firmware versions for
RAID controllers, see Diagnostics for RAID Controllers, SAS Controllers,
SCSI Controllers, and Attached Hard Drives
.
Diagnostic Requirements
To run Online Diagnostics you require:
• Administrator privileges
• Devices that are required for each operating system to run Online
Diagnostics.