Owner's Manual

28 Using Dell Online Diagnostics
NOTE: The tests are queued for execution in the order in which they were
selected. To stop tests from queuing, click Stop on the Queuing Diagnostic
Tests window.
4 Click the Status tab to monitor the status of the test execution.
• To abort a running test, right-click the test and select
Abort .
Select
Abort All to stop all the queued tests.
• To suspend a running test, right-click the test and select
Suspend .
• To resume a suspended test, right-click the test and select
Resume .
The icons in the
Result column indicate the status of each test.
•The
In Progress icon ( ) indicates that the test is currently being
executed.
•The
Aborted icon ( ) indicates that the test was aborted.
NOTE: Not all diagnostic tests support the Abort option. If a test’s status is
Ready, it can be aborted. Only tests that support the Abort option can be
aborted when in the Executing state
.
•The Suspended icon ( )indicates that the test was suspended and
may be restarted again at a later time.
NOTE: Not all diagnostic tests support the Suspend feature.
•The OK icon ( ) indicates that the test executed successfully and
no errors were encountered.
NOTE: The Abort/Suspend/Abort All options are not available until a few
seconds after queuing is complete. All queued tests must have the Status
column filled in the table for the Abort/Suspend/Abort All option to
be available.
• The non-critical icon ( )indicates that non-critical errors were
encountered during the execution of the test.
•The
Critical icon ( ) indicates that the test has failed.
5 Click the Results tab to view the test execution result. The Results column
contains a brief description of the test results. You can also double-click
any row to view the
Device, Test and Result Details window.
If the application displays a critical error while executing a test, the
Results
column provides a brief description of the nature of the error and the