Administrator Guide

Virtual Server Networking CLI | 125
Command
History
Usage
Information
The show vmmap command displays information on the virtual machines accessed on a
switch interface, including the virtual machine name, VMAC address, and
corresponding VLAN ID
Related
Commands
Example
Dell#show vmmap gigabitethernet 0/32
VM Name VIF Vlan ID
Redhat_207_03_nfs 00:0c:29:4f:66:19 -
Redhat_207_03_nfs 00:50:56:92:00:77 138
type
S5000
MXL
Set the hypervisor type to which you want to connect.
Syntax
[no] type {vmware | xen-citrix}
Defaults
None
Parameters
Command Modes
HYPERVISOR
Usage
Information
You must configure a hypervisor type in order to enable VSN connections with
virtual servers. Use the
show hypervisor supported command to display the currently
supported hypervisor types.
Command
History
Version 9.6(0.0) Introduced on the S5000.
Version 9.2(0.0) Introduced on the MXL switch.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.8.0 Introduced on the S4810.
hypervisor Define a hypervisor instance.
Note: In show vmmap output, VLAN 1 is displayed as VLAN ID 1; VLAN 4095 is
displayed without a VLAN ID as "- "
vmware Set the hypervisor type as VMware.
xen-citrix Set the hypervisor type as Xen-Citrix.
Version 9.6(0.0) Introduced on the S5000.
Version 9.2(0.0) Introduced on the MXL switch.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.8.0 Introduced on the S4810.