Administrator Guide

126 | Virtual Server Networking CLI
www.dell.com | support.dell.com
vsn enable
S5000
MXL
Enable VSN on an interface.
Syntax
[no] vsn enable
Defaults
VSN is disabled by default on switch interfaces.
Command Modes
INTERFACE
Command
History
Usage
Information
Enter the vsn enable command only on hypervisor-facing interfaces. DO NOT enter
this command on an interface used for inter-switch links.
Enter the
no vsn enable command to remove the VSN configuration from the system.
You must reconfigure VSN to re-enable a hypervisor session.
Version 9.6(0.0) Introduced on the S5000.
Version 9.2(0.0) Introduced on the MXL switch.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.8.0 Introduced on the S4810.