Administrator Guide

82 | Smart Scripting CLI
www.dell.com | support.dell.com
mount nfs
S5000,
Z9000, Z9500,
MXL Switch
Share the network file system to be used by the local Dell Networking OS file
system.
Syntax
mount nfs nfs-server-ip: remote_dir mount_name [username username
password password]
To unmount the network file system, use the no mount command.
Parameters
Defaults
None
Command Modes
CONFIGURATION
Command
History
Related
commands
Usage
Information
• All the mount points are maintained in the /f10/mnt/nfs folder.
• Only the relative path (mount point name) is acceptable. If the path entered is
either complete or absolute, an error are thrown.
• If the mount point exists already under the f10/mnt, you can re-use it or it is
created under /f10/mnt/nfs and used.
remote_dir
mount_name
Enter the directory path where the network file system will be
mounted.
username username (Optional) Enter the keyword username followed by a text string
up to 40 characters long as the user name.
password password (Optional) Enter the keyword password followed by a text string
up to 40 characters long as the password.
Version 9.6(0.0) Introduced on the S5000.
Version 9.5(0.1) Introduced on the Z9500.
Version 9.3(0.0) Introduced on the S6000.
Version 9.2(0.0) Introduced on the S4810, S4820T, Z9000, and MXL Switch.
script path Configure the search path to point the local file share of NFS
and to run the scripts in the NFS, as unnamed.