Owner's Manual

Smart Scripting CLI | 97
start shell
Z9000
MXL Switch
Start a NetBSD UNIX shell.
Syntax
start shell
Defaults
None
Command Modes
EXEC Privilege
Command
History
Usage
Information
You must start an NetBSD shell on a switch before you can enter UNIX commands
(Table 5-2) or run a script directly from the shell to invoke Dell Networking OS
operations (refer to Running a Script from the UNIX Shell).
After you start a shell, you are prompted to enter a user name and password.
Related
commands
switch script limit
Z9000
MXL Switch
To control the script that is running based on CPU, memory, or disk IO usage, use the
switch script limit.
Syntax
switch script limit {cpu percentage mem percentage disk percentage}
To return to the default value, use the no switch script limit command.
Parameters
Version 9.2(0.0) Introduced on the MXL Switch.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.8.0 Introduced on the S4810.
show packages Display all Open Automation packages installed on the
switch.
cpu percentage Enter the keyword cpu and the maximum percentage limit to
suspend and hold scripts for execution. The range is from 20 to 90
percent.
mem percentage Enter the keyword mem and the maximum percentage limit to
suspend and hold scripts for execution. The range is from 20 to 90
percent.
disk percentage Enter the keyword disk and the maximum percentage limit to
suspend and hold scripts for execution. The range is from 20 to 90
percent. Only the /usr/pkg is monitored.