Service Manual

Usage Information
To display the interface, virtual-switch name, and Hypervisor-session name for all
current Hypervisor connections on the switch, use the show virtualswitch
command.
To display detailed information about a Hypervisor session, re-enter the command
with the interface and virtual-switch name for the session from the
show
virtualswitch output as shown in the following example.
Example
The following command output displays information on the Hypervisor sessions
established on all virtual switches on network servers connected to switch
interfaces.
Dell#show virtualswitch
Interface VSwitch Hypervisor
Gi 0/32 vSwitch3 VMWare_vmware207
Po 7 vSwitch1 VMWare_vmware206
The following command output displays information on the Hypervisor session
established on virtual switch vSwitch3 on a VMware server connected to the
interface 0/32.
Dell#show virtualswitch Gigabitethernet 0/32 vSwitch3
Interface :Gi 0/32
Hypervisor Type :vmware
Hypervisor Name :vmware207
Hypervisor Version :4.1.0
Virtual Switch :vSwitch3
Port groups :
Name :VLAN 3
Vlan Id :138
VIFs:
MAC MTU
00:50:56:92:00:77 8000
Name :VM Network 4
Vlan Id :-
VIFs:
MAC MTU
00:0c:29:4f:66:19 8000
PIFs:
MAC MTU
00:26:55:dd:01:4f 8000
NOTE: In the show virtualswitch output, VLAN 1 displays as VLAN ID 1;
VLAN 4095 displays without a VLAN ID as "-".
show vmmap
Displays the virtual machines accessed on a switch interface.
S4810, S4820T, S5000, and MXL Switch
Syntax
show vmmap interface
136
Virtual Server Networking CLI