Service Manual

Route Model for IPv6
+--ro route
+--ro gateway-of-last-resort? string
+--ro route-entry* [destination]
| +--ro destination dell:ipv6-address-with-prefix
| +--ro gateway? dell:ipv6-address-with-prefix
| +--ro route-type? enumeration
| +--ro route-owner? string
| +--ro metric? string
| +--ro intf-type? string
| +--ro last-change? yang:timestamp
| +--ro state? enumeration
| +--ro default-route? boolean
| +--ro summary? boolean
+--ro summary
+--ro connected-active? uint32
+--ro connected-inactive? uint32
+--ro dynamic-active? uint32
+--ro dynamic-in-active? uint32
+--ro static-active? uint32
+--ro static-inactive? uint32
+--ro route-size-active? uint32
+--ro route-size-in-active? uint32
Management Information Base (MIB)
Management Information Base (MIB) is a database of objects that can be monitored by a network
management system. Dell Networking OS management information system (MIB) supports many new
simple network management protocol (SNMP) objects and notifications. The following MIBS are
translated and exposed via the REST API.
BGP V2
The following definition displays the properties of Interfaces using BGP V2:
Module: BGP – V2
URI:
/api/operational/mib/bgp-v2
Methods
Supported:
GET
BGP V2 Model
+--ro mib
+--ro bgp4-v2
+--ro f10BgpM2
| +--ro f10BgpM2CapabilitySupportAvailable? snmpv2-tc:TruthValue
| +--ro f10BgpM2AsSize? enumeration
| +--ro f10BgpM2LocalAs? inet-
address:InetAutonomousSystemNumber
| +--ro f10BgpM2LocalIdentifier? inet:ip-address
| +--ro f10BgpM2RouteReflector? snmpv2-tc:TruthValue
| +--ro f10BgpM2ClusterId? mib:F10BgpM2Identifier
| +--ro f10BgpM2ConfederationRouter? snmpv2-tc:TruthValue
| +--ro f10BgpM2ConfederationId? inet-
address:InetAutonomousSystemNumber
| +--ro f10BgpM2CfgBaseScalarStorageType? snmpv2-tc:StorageType
| +--ro f10BgpM2CfgLocalAs? inet-
REST API
183