Service Manual

Downloaded Image Minor Version : 0
00:02:56: %STKUNIT0-M:CP %BMP-5-BMP_RELEASE_HEADER_INFO:
Downloaded Image Main Version : 0
00:02:56: %STKUNIT0-M:CP %BMP-5-BMP_RELEASE_HEADER_INFO:
Downloaded Image Patch Version : 1216
00:02:56: %STKUNIT0-M:CP %BMP-5-BMP_RELEASE_HEADER_INFO:
Flash A Image Major Version : 1
00:02:56: %STKUNIT0-M:CP %BMP-5-BMP_RELEASE_HEADER_INFO:
Flash A Image Minor Version : 0
00:02:56: %STKUNIT0-M:CP %BMP-5-BMP_RELEASE_HEADER_INFO:
Flash A Image Main Version : 0
00:02:56: %STKUNIT0-M:CP %BMP-5-BMP_RELEASE_HEADER_INFO:
Flash A Image Patch Version : 1216
b. If the build images versions are different, the system stores the downloaded build image in local
flash memory and loads the build image from the flash. This process repeats until the build
image versions match.
The system looks for the configuration file on the file server. If the system does not find a configuration
file, the download fails. If the build image processing is successful, BMP stops. If the build image
download also fails, the current offer is treated as invalid and BMP tries to send DISCOVER messages.
Reload with a DHCP Server Offer Without a DNS Server
Reload the Dell Networking OS on a switch using a pre–configuration script.
To reload the Dell Networking OS on a switch using a pre–configuration script, the following must be
true:
• BMP is enabled.
• The download of the script is from an external server and the location is specified in the DHCP offer.
• The first line of the script contains one of the following:
#!/usr/bin/expect
#!/usr/bin/tclsh
#!/usr/bin/zsh
• If you installed the SmartScripts package, the Dell Networking OS also supports pre–configurated
scripts in Perl, Python, and Ruby.
#!/usr/pkg/bin/perl
#!/usr/pkg/bin/python
• After the first line, but before the start of the script, the script contains the signature #/DELL-
NETWORKING.
• The pre–configuration script downloads instead of the configuration file.
• The pre–configuration script runs before applying the start-up configuration file.
• The pre–configuration script can use the Dell Networking OS CLI commands using the f10do utility.
• When the pre–configuration script completes, the start up configuration file automatically applies.
If a pre–configuration script file downloads successfully, the following SYSLOGs display:
00:03:07: %STKUNIT0-M:CP %BMP-2-BMP_DOWNLOAD_START: The config
file download has started.
00:03:19: %STKUNIT0-M:CP %BMP-5-BMP_DWNLD_FILE_IS_SCRIPT_FILE:
The downloaded file is a script file.
00:03:19: %STKUNIT0-M:CP
%BMP-5-BMP_DWNLD_CONFIG_SCRIPT_SUCCESS: The config/script file
download is successful.
00:03:21: %STKUNIT0-M:CP %BMP-5-BMP_PRE_CONFIG_SCRIPT_BEGIN:
The Pre-Config Script has started to Execute.
Bare Metal Provisioning
25