Service Manual

Version Description

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–

ON, Z9000, Z9500, IOA, and MXL.

Commands

• reload-type — allows you to configure the reload-type options in reload-type

sub command mode.

• show reload-type — displays the current Reload mode (BMP mode or Normal

mode).

reload-type

Allows you to configure the reload-type options in reload-type sub command mode.

S4810, S4820T, S3048–ON, S3100 series, S4048–ON, S5000, S6000,

S6000–ON, Z9100–ON, Z9500, IOA, and MXL

Syntax

reload-type

Defaults BMP

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0P1) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048–ON.

9.8(0.0P2) Introduced on the S3048–ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–

ON, Z9000, Z9500, IOA, and MXL.

9.6(0.0) Introduced on the S5000.

9.5(0.1) Introduced on the Z9500.

9.3(0.0) Introduced on the S6000.

9.2(0.0) Introduced on the MXL Switch. Updated the parameters for

S4810, S4820T, and Z9000.

9.1(0.0) Updated the command mode from EXEC Privilege to

GLOBAL CONFIGURATION. Updated the parameter from

jumpstart to bmp. Added support for the config-scr-

Bare Metal Provisioning CLI