Service Manual

Version Description
download and user-defined-string commands.
Supported platforms are S4810, S4820T, and Z9000.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced in Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.1.0 Introduced on the S4810.
Related
Commands
• show reload-type — displays the current Reload mode (BMP mode or Normal
mode).
• stop bmp — stops the BMP process and prevents a loop if the DHCP server is
not found.
script post-config
To run the post-configuration script after the pre–configuration script is executed during the BMP reload,
ensure that this command is present in the startup–configuration.
S4810, S4820T, S3048–ON, S3100 series, S4048–ON, S5000, S6000,
S6000–ON, Z9100–ON, Z9500, and MXL
Syntax
script post-config {script-name}
Parameters
scriptname
Enter the name of the script to run after the BMP start–up
configuration is applied.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform–specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
Bare Metal Provisioning CLI
49