Service Manual

Version Description

9.3(0.0) Introduced on the S6000.

9.2(0.0) Introduced on the MXL switch and S4820T.

9.1(0.0) Introduced on the Z9000 and S4810.

show boot bmp

Displays the current state of the BMP process.

S4810, S4820T, S3048–ON, S3100 series, S4048–ON, S5000, S6000,

S6000–ON, Z9100–ON, Z9500, and MXL

Syntax

show boot bmp

Defaults none

Command Modes EXEC

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0P1) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048–ON.

9.8(0.0P2) Introduced on the S3048–ON.

9.7(0.0) Introduced on the S6000–ON.

9.6(0.0) Introduced on the S5000.

9.5(0.1) Introduced on the Z9500.

9.3(0.0) Introduced on the S6000.

9.2(0.0) Introduced on the Z9000, S4810, S4820T, and MXL switch.

Example

Dell# show boot bmp

Config Download

via DHCP: enabled

BMP State : Waiting for boot options

...

BMP State : Received DHCP offer from DHCP server 25.1.1.1

***** SELECTED OFFER DETAILS ******

Server type= DHCP

Acquired IP= 25.1.1.25

Subnet-mask = 255.255.0.0

Image file = tftp://25.1.1.1/boot_file.bin

config file = tftp://25.1.1.1/config_file.cfg

Bare Metal Provisioning CLI