Setup Guide

Version Description
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the S4810, S4820T, Z9000, and MXL Switch.
Usage Information
The path can contain a network le system (NFS) mounted directory (see the mount nfs command). The path
is added to a script search list allowing the system to search all locations for the script name. If the script is in
multiple locations, the system uses the rst instance of the script found.
Related Commands mount nfs — sets up the folders in the NFS-mounted directory.
script remove
Removes a script from a switch.
S4810, S4820T, S3048–ON, S3100 Series, S4048–ON,
S4048T–ON, S5000, S6000, S6000–ON, S6010–ON, S6100–
ON, Z9100–ON, Z9500, C9010, and MXL
Syntax
script remove {file-name | all}
Parameters
file-name
Enter the lename of the script to remove from the switch.
all
Enter the keywords all to remove all les from the dedicated folder on the switch.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T–ON and S6010–ON.
9.10(0.0) Introduced on the S3100 Series and S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
104 Smart Scripting CLI