Setup Guide

ManualsBrandsDell ManualsserversDell Open Automation

111

112

113

114

115

116

117

118

119

120

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

The following is a list of the Dell EMC Networking OS version history for this command.

Version Description

9.10(0.1) Introduced on the S4048T–ON and S6010–ON.

9.10(0.0) Introduced on the S3100 Series and S6100–ON.

9.9(0.0) Introduced on the C9010.

9.8(1.0P1) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048–ON.

9.8(0.0P2) Introduced on the S3048–ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, and MXL.

switch script limit

To control the script that is running based on CPU, memory, or disk IO usage, use the switch script limit.

S4810, S4820T, S3048–ON, S3100 Series, S4048–ON,

S4048T–ON, S5000, S6000, S6000–ON, S6010–ON, S6100–

ON, Z9100–ON, Z9500, C9010, and MXL

Syntax

switch script limit {cpu percentage mem percentage disk percentage}

To return to the default value, use the no switch script limit command.

Parameters

cpu percentage

Enter the keyword cpu and the maximum percentage limit for the script execution. The

range is from 20 to 90 percent.

mem percentage

Enter the keyword mem and the maximum percentage limit for the script execution. The

range is from 20 to 90 percent.

disk

percentage

Enter the keyword disk and the maximum percentage limit for the script execution. The

range is from 20 to 90 percent. Only /usr/pkg is monitored.

Defaults none

Command Modes CONFIGURATION