Setup Guide

show virtualswitch
Displays the components of current Hypervisor sessions, including the virtual switch and name of the Hypervisor session to which a switch
interface is connected.
S4810, S4820T, S5000, and MXL Switch
Syntax
show virtualswitch [interface] [virtualswitch-name]
Parameters
interface
Display information on the Hypervisor session established on a specied interface. Enter
one of the following interface types:
• For a 100/1000 Ethernet interface or 1-Gigabit Ethernet interface, enter
GigabitEthernet slot/port.
• For a 10-Gigabit Ethernet interface, enter TenGigabitEthernet slot/port.
•
For a port-channel interface, enter port-channel number. Valid port-channel
numbers are from 1 to 128.
virtualswitch-
name
Display information on a specied virtual switch by entering the name the Hypervisor
generates.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000.
9.2(0.0) Introduced on the MXL switch.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage Information
To display the interface, virtual-switch name, and Hypervisor-session name for all current Hypervisor connections
on the switch, use the show virtualswitch command.
To display detailed information about a Hypervisor session, re-enter the command with the interface and virtual-
switch name for the session from the show virtualswitch output as shown in the following example.
Example
The following command output displays information on the Hypervisor sessions established on all virtual switches
on network servers connected to switch interfaces.
DellEMC#show virtualswitch
Interface VSwitch Hypervisor
Gi 0/32 vSwitch3 VMWare_vmware207
Po 7 vSwitch1 VMWare_vmware206
Virtual Server Networking CLI 133