Setup Guide

REST API CLI
The REST API CLI commands are supported on the S4810, S4820T, S3048–ON, S4048–ON, S4048T–ON, S5048F-ON, S6000, S6000–
ON, S6010–ON, S6100–ON, Z9100–ON, C9010, S5000, and Z9500 platforms.
Topics:
• rest-server
• crypto cert generate
• crypto cert install
• show crypto cert
• show ip rest-server
rest-server
Enables the REST API service over a non-secure or secure HTTP.
S4810, S4820T, S3048–ON, S4048–ON, S4048T–ON, S5000,
S6000, S6000–ON, S6010–ON, S6100–ON, Z9100–ON,
C9010, and Z9500
Syntax
rest-server {http | secure-http}
To disable the REST API over a non-secure or secure HTTP request, use the no rest-server {http |
secure-http} command.
Parameters
http
Enable the REST API on HTTP (Port: 8008).
secure-http
Enable the REST API on HTTPS (Port: 8888).
Defaults REST API is disabled by default.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T–ON and S6010–ON.
9.10(0.0) Introduced on the C9010 and S6100–ON.
9.8(1.0P1) Introduced on the Z9100–ON.
12
REST API CLI 193