Setup Guide

cong-scr-download
Allows you to specify whether the conguration or script le needs to be downloaded.
S4810, S4820T, S3048–ON, S3100 series, S4048–ON,
S4048T–ON, S5000, S5048F-ON, S6000, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, Z9500,
C9010, IOA, FN-
IOM, and MXL
Syntax
config-scr-download { enable | disable }
To reset the download option, use the no config-scr-download { enable | disable } command.
Parameters
config-scr-
download
{enable}
Enable downloading a conguration le or pre–conguration script from the DHCP / le
servers.
config-scr-
download
{disable}
Disable downloading a conguration le or pre–conguration script from the DHCP/ le
servers.
Defaults none
Command Modes RELOAD-TYPE CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T–ON and S6010–ON.
9.10(0.0) Introduced on the S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, IOA, and
MXL.
Usage Information
For an initial setup, the config-scr-download parameter of the reload-type command is enabled. After
the conguration le successfully downloads, the config-scr-download parameter is automatically disabled.
You can enable it again using the
reload-type command.
Bare Metal Provisioning CLI 43