Setup Guide

Version Description
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the S4810, S4820T, Z9000, and MXL.
Usage Information
• All the mount points are maintained in the /f10/mnt/nfs folder.
• Only the relative path (mount point name) is acceptable. If the path you enter is either complete or absolute, an
error occurs.
• If the mount point exists under the f10/mnt, you can reuse it or it is created under /f10/mnt/nfs and
used.
NOTE: The NFS server exportfs setting must include the insecure keyword.
root@administrator-X8DTU-6:/usr# exportfs -v
/home/admin 1.1.0.0/16
(rw, wdelay, insecure, root_squash, no_subtree_check, sec=sys, rw,
root_squash, no_all_squash)
Related Commands
script path — congures the search path to point to the local le share of NFS and runs the scripts in the NFS as
unnamed.
package clear-all
Clears all the installed Open Automation packages and user scripts.
S4810, S4820T, S3048–ON, S3100 Series, S4048–ON,
S4048T–ON, S5000, S6000, S6000–ON, S6010–ON, S6100–
ON, Z9100–ON, Z9500, C9010, and MXL
Syntax
package clear-all
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T–ON and S6010–ON.
9.10(0.0) Introduced on the S3100 Series and S6100–ON.
92 Smart Scripting CLI