Setup Guide
Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S3100 Series, S4048–ON, S5000, S6000,
S6000–ON, Z9100–ON, Z9500, C9010, and MXL.
package install
Installs the Smart Scripting package. This command downloads the package from the specied location and installs it in the internal ash
memory on a switch.
S4810, S4820T, S3048–ON, S3100 Series, S4048–ON,
S4048T–ON, S5000, S6000, S6000–ON, S6010–ON, S6100–
ON, Z9100–ON, Z9500, C9010, and MXL
Syntax
package install location
Parameters
location
Enter the download and install location the Open Automation package, where location is
one of the following values:
• From the local ash: flash://filename
• From an FTP server: ftp://userid:password@host-ipaddress/filepath
• From a TFTP server: tftp://host-ipaddress/filepath
• From an NFS mount server: nfsmount://filepath
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T–ON and S6010–ON.
9.10(0.0) Introduced on the S3100 Series and S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
9.2(0.0) Introduced on the MXL switch.
Smart Scripting CLI 93