Users Guide

• SCP: Copy from the remote le system using SCP (scp://userid:password@hostip/filepath)
• FTP: Copy from the remote le system using FTP (tftp://hostip//filepath)
The downloaded les are stored into a dedicated folder (/usr/pkg/ss-scripts). For S3100 series, the
dedicated folder path is /f10/flash/pkg/ss-scripts.
NOTE: For stack systems, the script from ss-scripts synchronizes across the stack for every one
hour. When the stack forms rst, the script synchronization from the master to members happens only
after 10 minutes.
script path
Congures the path for the script on the switch.
S4810, S4820T, S3048–ON, S3100 Series, S4048–ON,
S4048T–ON, S5000, S6000, S6000–ON, S6010–ON, S6100–
ON, Z9100–ON, Z9500, C9010, and MXL
Syntax
script path path-name
To remove the congured path from the SmartScript environment variable and return to the default script path,
use the no script path command.
Parameters
path-name
Enter the list of custom paths for the location of scripts. Separate multiple paths using a
colon (:). These custom paths are prexed to the default paths.
Defaults The default paths are: /usr/pkg/ss-scripts:/usr/pkg/bin:/usr/pkg/sbin:/bin:/sbin:/cr-
usr/bin:/cr-usr/sbin:/f10:/f10/bin:/f10/sbin:/f10/usr/bin:/f10/usr/sbin:/usr/
bin:/usr/sbin:/f10/flash/pkg/ss-scripts:/f10/flash/pkg/usr/pkg/bin:/f10/
flash/pkg/usr/pkg/sbin
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T–ON and S6010–ON.
9.10(0.0) Updated the default script path. Introduced on the S3100 Series and S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
Smart Scripting CLI 103