Users Guide

The following command output displays information on the Hypervisor session established on virtual switch
vSwitch3 on a VMware server connected to the interface 0/32.
DellEMC#show virtualswitch Gigabitethernet 0/32 vSwitch3
Interface :Gi 0/32
Hypervisor Type :vmware
Hypervisor Name :vmware207
Hypervisor Version :4.1.0
Virtual Switch :vSwitch3
Port groups :
Name :VLAN 3
Vlan Id :138
VIFs:
MAC MTU
00:50:56:92:00:77 8000
Name :VM Network 4
Vlan Id :-
VIFs:
MAC MTU
00:0c:29:4f:66:19 8000
PIFs:
MAC MTU
00:26:55:dd:01:4f 8000
NOTE: In the show virtualswitch output, VLAN 1 displays as VLAN ID 1; VLAN 4095 displays
without a VLAN ID as "-".
show vmmap
Displays the virtual machines accessed on a switch interface.
S4810, S4820T, S5000, and MXL Switch
Syntax
show vmmap interface
Parameters
interface
Display information on the Hypervisor session established on a specied interface. Enter
one of the following interface types:
• For a 100/1000 Ethernet interface or 1-Gigabit Ethernet interface, enter
GigabitEthernet slot/port.
• For a 10-Gigabit Ethernet interface, enter TenGigabitEthernet slot/port.
•
For a port-channel interface, enter port-channel number. Valid port-channel
numbers are from 1 to 128.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000.
134 Virtual Server Networking CLI