Users Guide

boot-type
Allows you to congure the reload type.
S4810, S4820T, S3048–ON, S3100 series, S4048–ON,
S4048T–ON, S5000, S6000, S6000–ON, S6010–ON, S6100–
ON, Z9100–ON, Z9500,
C9010, IOA, FN-IOM, and MXL
Syntax
boot-type { bmp-reload | normal-reload }
To reset the boot-type mode, use the no boot-type { bmp-reload | normal-reload } command.
Parameters
bmp-reload
Reloads the system in BMP mode. After performing the reload, the system retrieves the
Dell EMC Networking OS image and startup-conguration les from the ash.
normal-reload
Reloads the system in manual interactive mode.
Defaults none
Command Modes RELOAD-TYPE CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T–ON and S6010–ON.
9.10(0.0) Introduced on the S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0P1) Introduced on the Z9100–ON
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, Z9000, Z9500, IOA, and
MXL.
Related Commands
• reload-type — allows you to congure the reload-type options in reload-type sub command mode.
• show reload-type — displays the current Reload mode (BMP mode or Normal mode).
42 Bare Metal Provisioning CLI