Users Guide

The stop bmp command behaves dierently in dierent circumstances:
• While the Dell EMC Networking OS image upgrade is in progress, it aborts the BMP process after the Dell
EMC Networking OS image upgrades.
• When applying congurations from the le, it aborts the BMP process after all the congurations are applied in
the system.
• When running the pre-conguration or post-conguration script, it stops the script and aborts the BMP
process immediately.
• When downloading the conguration or script le, it aborts the BMP process after the download and does not
apply the conguration or run the script.
When you enter GLOBAL CONFIGURATION mode during the BMP process, to avoid conguration conicts
between you and the BMP process, warning / error messages display.
Related Commands
reload-type — allows you to congure the reload-type options in reload-type sub command mode.
vendor class identier
Allows you to congure the optional vendor class identier for DHCP option 60.
S4810, S4820T, S3048–ON, S3100 series, S4048–ON,
S4048T–ON, S5000, S6000, S6000–ON, S6010–ON, S6100–
ON, Z9100–ON, Z9500, C9010, , IOA, FN-IOM, and MXL
Syntax
vendor-class-identifier description
To reset the vendor-class-identier option, use the no vendor-class-identifier description
command.
Parameters
vendor-class-
identifier
description
Enter the keyword vendor-class-identifier, then a brief description for the user-
dened eld in option 60. The maximum is 64 characters long. The user string is
appended with Type, Hardware, Serial Number, Service Tag and OS Version.
Defaults none
Command Modes RELOAD-TYPE CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.10(0.1) Introduced on the S4048T–ON and S6010–ON.
9.10(0.0) Introduced on the S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0P1) Introduced on the Z9100–ON.
Bare Metal Provisioning CLI 55