Administrator Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000.
9.2(0.0) Introduced on the MXL switch.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage
Information
You can use the mode command to change how virtual-server information is
retrieved in an existing Hypervisor session.
The following log messages display when you use the Hypervisor mode check
option to retrieve configuration information on virtual servers:
Dec 1 04:57:48: %STKUNIT0-M:CP %VSNMGR-5-VSN_VLAN_DISCOVERY:
Te 0/35, Vlan:
4001-4008,4011-4012
Dec 1 04:56:46: %STKUNIT0-M:CP %VSNMGR-5-VSN_VLAN_WITHDRAWAL:
Te 0/35, Vlan:
4001-4008,4011-4012
package install
Install an Open Automation package, such as VSN. This command downloads the package from the
specified location and installs it in the internal flash memory on a switch.
S4810, S4820T, S5000, and MXL Switch
Syntax
package install location
Parameters
location
Enter the location where you want to install an Open
Automation package, where location is one of the following
values:
flash://filename installs the VSN package file stored
in flash memory on the switch.
ftp://userid:password@host-ip-address/file-
path logs in and installs VSN from a file stored on an FTP
server.
tftp://host-ip-address/file-path installs VSN
from a file stored on a TFTP server.
nfsmount://filepath copies from a file stored on an
NFS mount file system.
Defaults none
Virtual Server Networking CLI
115