Administrator Guide

Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, Z9000,
Z9500, IOA, and MXL Switch.
Related
Commands
• reload-type — allows you to configure the reload-type options in reload-type
sub command mode.
• show reload-type — displays the current Reload mode (BMP mode or Normal
mode).
bmp logging
Configure the syslog messages in a console while BMP is running.
S4810, S4820T, S5000, S6000, Z9000, Z9500 and MXL Switch
Syntax
bmp logging {enable | disable}
Parameters
enable
Enables the syslog messages in the console while BMP is
running.
disable
Disables the syslog messages in the console while BMP is
running.
Defaults none
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S6000.
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Usage
Information
This command is applicable only when BMP is running and enables or disables the
syslog messages (with a Severity level >2, critical).
40
Bare Metal Provisioning CLI