Administrator Guide

config-scr-download

Allow you to specify whether the configuration or script file needs to be downloaded.

S4810, S4820T, S5000, S6000, Z9000, Z9500, IOA, and MXL Switch

Syntax

config-scr-download { enable | disable }

To reset the download option, use the no config-scr-download { enable |

disable } command.

Parameters

config-scr-

download

{enable}

Enable downloading a configuration file or preconfiguration

script from the DHCP / file servers.

config-scr-

download

{disable}

Disable downloading a configuration file or preconfiguration

script from the DHCP/ file servers.

Defaults none

Command

Modes

RELOAD-TYPE CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, Z9000,

Z9500, IOA, and MXL Switch .

Usage

Information

For an initial setup, the config-scr-download parameter of the reload-type

command is enabled. After the configuration file successfully downloads, the

config-scr-download parameter is automatically disabled. You can enable it

again using the reload-type command.

Commands

• reload-type — allows you to configure the reload-type options in reload-type

sub command mode.

• show reload-type — displays the current Reload mode (BMP mode or Normal

mode).

Bare Metal Provisioning CLI