Administrator Guide

Version Description

9.6(0.0) Introduced on the S5000.

9.5(0.1) Introduced on the Z9500.

9.3(0.0) Introduced on the S6000.

9.2(0.0) Introduced on the MXL Switch.

9.1(0.0) Introduced on the Z9000 and S4810.

8.3.19.0 Introduced on the S4820T.

Usage

Information

To upgrade any NVRAM changes to the chassis caused by the following CLI

commands, use the reload conditional nvram-cfg-change command on a

switch running BMP.

• stack-unit {unit} stack-group

• stack-unit {unit} port {fanout-portid} portmode quad

• asf-mode

• cam-acl

• buffer-profile

reload-type

Allow you to configure the reload-type options in reload-type sub command mode.

S4810, S4820T, S5000, S6000, Z9000, Z9500, IOA, and MXL Switch

Syntax

reload-type

Defaults BMP

Command

Modes

CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, Z9000,

Z9500, IOA, and MXL Switch.

9.6(0.0) Introduced on the S5000.

9.5(0.1) Introduced on the Z9500.

9.3(0.0) Introduced on the S6000.

Bare Metal Provisioning CLI