Administrator Guide

Version Description

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, Z9000,

Z9500, IOA, and MXL Switch.

Commands

• reload-type — allows you to configure the reload-type options in reload-type

sub command mode.

• show reload-type — displays the current Reload mode (BMP mode or Normal

mode).

script post-config

To run the post-configuration script after the preconfiguration script is executed during the BMP reload,

ensure that this command is present in the startup-configuration.

S4810, S4820T, S5000, S6000, Z9000, Z9500 and MXL Switch

Syntax

script post-config {script-name}

Parameters

scriptname

Enter the name of the script to run after the BMP start-up

configuration is applied.

Defaults none

Command

Modes

CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.6(0.0) Introduced on the S5000.

9.5(0.1) Introduced on the Z9500.

9.3(0.0) Introduced on the S6000.

9.2(0.0) Introduced on the MXL switch and S4820T.

9.1(0.0) Introduced on the Z9000 and S4810.

Bare Metal Provisioning CLI