Administrator Guide

Version Description

9.2(0.0) Introduced on the S4810, S4820T, Z9000, and MXL switch.

Usage

Information

• All the mount points are maintained in the /f10/mnt/nfs folder.

• Only the relative path (mount point name) is acceptable. If the path you enter is

either complete or absolute, an error occurs.

• If the mount point already exists under the f10/mnt, you can re-use it or it is

created under

/f10/mnt/nfs and used.

Commands

script path — configures the search path to point to the local file share of NFS and

runs the scripts in the NFS as unnamed.

package install

Install the Smart Scripting package. This command downloads the package from the specified location

and installs it in the internal flash memory on a switch.

S4810, S4820T, S5000, S6000, Z9000, Z9500 and MXL Switch

Syntax

package install location

Parameters

location

Enter the download and install location the Open

Automation package, where location is one of the following

values:

• From the local flash: flash://filename

• From an FTP server: ftp://userid:password@host-

ipaddress/filepath

• From a TFTP server: tftp://host-ipaddress/

filepath

• From an NFS mount server: nfsmount://filepath

Defaults none

Command

Modes

EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.6(0.0) Introduced on the S5000.

9.5(0.1) Introduced on the Z9500.

Smart Scripting CLI