Administrator Guide

Defaults The script runs in the background.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, Z9000,
Z9500, and MXL.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the S4810, S4820T, Z9000, and MXL Switch.
Usage
Information
All times selected follow the system time of the switch. The maximum number of
scripts to execute is 100. An error message displays when you exceed the limit.
If the supervised scripts exit (normally or in an unexpected manner):
• Within 10 minutes from the start, the supervised scripts restart (three retries).
• More than three times within 10 minutes, the script is in the Blocked state,
which you can reset using the script clear command.
• TACACS/RADIUS users are not supported.
• Only the person who configures the scheduled scripts (or a higher privileged
user) can change them.
• If you do not provide the username, the system uses current session username.
If the script is triggered from the console, the system uses the Dell Networking
OS default username (smartuser).
script get
Copy a script to a switch.
S4810, S4820T, S5000, S6000, Z9000, Z9500 and MXL Switch
Syntax
script get url
Parameters
url
Enter the keyword url then the URL location of the script to
download to a switch.
Defaults none
88
Smart Scripting CLI