Service Manual

mount nfs
Share the network file system the local Dell Networking OS file system uses.
S4810, S4820T, S3048–ON, S3100 Series,
S4048–ON, S5000, S6000, S6000–ON, S6100–
ON, Z9100–ON, Z9500, C9010, and MXL
Syntax
mount nfs nfs-server-ip: remote_dir mount_name [username username
password password]
To unmount the network file system, use the no mount command.
Parameters
remote_dir
mount_name
Enter the directory path where the network file system mounts.
username
username
(Optional) Enter the keyword username then a text string up to
40 characters long as the user name.
password
password
(Optional) Enter the keyword password then a text string up to
40 characters long as the password.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S3100 Series and S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
Smart Scripting CLI 106