Service Manual

Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S3100 Series,
S4048–ON, S5000, S6000, S6000–ON, Z9100–ON, Z9500,
C9010, and MXL.
package install
Installs the Smart Scripting package. This command downloads the package from the specified location and
installs it in the internal flash memory on a switch.
S4810, S4820T, S3048–ON, S3100 Series,
S4048–ON, S5000, S6000, S6000–ON, S6100–
ON, Z9100–ON, Z9500, C9010, and MXL
Syntax
package install location
Parameters
location
Enter the download and install location the Open Automation
package, where location is one of the following values:
• From the local flash: flash://filename
• From an FTP server: ftp://userid:password@host-
ipaddress/filepath
• From a TFTP server: tftp://host-ipaddress/
filepath
• From an NFS mount server: nfsmount://filepath
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S3100 Series and S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
Smart Scripting CLI 108