Service Manual

Version Description
9.10(0.0) Introduced on the S3100 Series and S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON,
Z9000, Z9500, and MXL.
script execute (EXEC mode)
Schedules the scripts from EXEC mode either to run in foreground or background.
S4810, S4820T, S3048–ON, S3100 Series,
S4048–ON, S5000, S6000, S6000–ON, S6100–
ON, Z9100–ON, Z9500, C9010, and MXL
Syntax
script execute script-name [start {at | date-time | after time}]
[stop {at date-time | after time}] [bg] [arguments arg[..arg]]
[username username]
To cancel, use the script unschedule command.
Parameters
script-name
Enter the name of the script to schedule for execution.
start at date-
time
Enter the keywords start at then the time and date in
HH:MM-MM/DD/YY format to start running the script at a
specific time and date or in HH:MM format to begin the script at
the specified time on the same day (if the mentioned time is
elapsed, the script runs on the next day HH:MM mentioned). The
date can be the present or a future date.
start after
time
Enter the keywords start after then the time in [HHHH:]
MMMM format to run the script after the set time. The date can
be the present or a future date.
stop at date-
time
Enter the keywords stop at then the time and date in HH:MM-
MM/DD/YY format to stop the script running at the specified
time or in HH:MM format to stop the script at the specified time
on the same day. The date must be a future date.
Smart Scripting CLI 115