Service Manual

Version Description
9.2(0.0) Introduced on the S4810, S4820T, Z9000, and MXL Switch.
Usage Information
The following formats are supported: Flash, FTP, TFTP, HTTP, and SCP. To retrieve the
script files, use the following formats:
• Flash: Copy from the flash file system (flash://filepath)
• FTP: Copy from the remote file system using FTP (ftp://
userid:password@hostip/filepath)
• HTTP: Copy from the remote file system using HTTP (http://hostip/
filepath)
• SCP: Copy from the remote file system using SCP (scp://
userid:password@hostip/filepath
)
• FTP: Copy from the remote file system using FTP (tftp://hostip//filepath)
The downloaded files are stored into a dedicated folder (/usr/pkg/ss-scripts). For
S3100 series, the dedicated folder path is /f10/flash/pkg/ss-scripts.
NOTE: For stack systems, the script from ss-scripts synchronizes across the
stack for every one hour. When the stack forms first, the script synchronization
from the master to members happens only after 10 minutes.
script path
Configures the path for the script on the switch.
S4810, S4820T, S3048–ON, S3100 Series,
S4048–ON, S5000, S6000, S6000–ON, S6100–
ON, Z9100–ON, Z9500, C9010, and MXL
Syntax
script path path-name
To remove the configured path from the SmartScript environment variable and return
to the default script path, use the no script path command.
Parameters
path-name
Enter the list of custom paths for the location of scripts.
Separate multiple paths using a colon (:). These custom paths
are prefixed to the default paths.
Defaults The default paths are: /usr/pkg/ss-scripts:/usr/pkg/bin:/usr/pkg/sbin:/
bin:/sbin:/cr-usr/bin:/cr-usr/sbin:/f10:/f10/bin:/f10/
sbin:/f10/usr/bin:/f10/usr/sbin:/usr/bin:/usr/sbin:/f10/
Smart Scripting CLI 120