Service Manual

The following log messages display when you use the Hypervisor mode check option
to retrieve configuration information on virtual servers:
Dec 1 04:57:48: %STKUNIT0-M:CP %VSNMGR-5-VSN_VLAN_DISCOVERY: Te
0/35, Vlan:
4001-4008,4011-4012
Dec 1 04:56:46: %STKUNIT0-M:CP %VSNMGR-5-VSN_VLAN_WITHDRAWAL: Te
0/35, Vlan:
4001-4008,4011-4012
package install
Installs an Open Automation package, such as VSN. This command downloads the package from the
specified location and installs it in the internal flash memory on a switch.
S4810, S4820T, S5000, and MXL Switch
Syntax
package install location
Parameters
location
Enter the location where you want to install an Open
Automation package, where location is one of the following
values:
• flash://filename — Installs the VSN package file stored
in flash memory on the switch.
• ftp://userid:password@host-ip-address/file-
path — Logs in and installs VSN from a file stored on an
FTP server.
• tftp://host-ip-address/file-path — Installs VSN
from a file stored on a TFTP server.
• nfsmount://filepath — Copies from a file stored on an
NFS mount file system.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000 switch.
9.2(0.0) Introduced on the MXL switch.
Virtual Server Networking CLI 150