Service Manual

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000.
9.2(0.0) Introduced on the MXL switch.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage Information
To display the interface, virtual-switch name, and Hypervisor-session name for all
current Hypervisor connections on the switch, use the show virtualswitch
command.
To display detailed information about a Hypervisor session, re-enter the command with
the interface and virtual-switch name for the session from the
show virtualswitch
output as shown in the following example.
Example
The following command output displays information on the Hypervisor sessions
established on all virtual switches on network servers connected to switch interfaces.
Dell#show virtualswitch
Interface VSwitch Hypervisor
Gi 0/32 vSwitch3 VMWare_vmware207
Po 7 vSwitch1 VMWare_vmware206
The following command output displays information on the Hypervisor session
established on virtual switch vSwitch3 on a VMware server connected to the interface
0/32.
Dell#show virtualswitch Gigabitethernet 0/32 vSwitch3
Interface :Gi 0/32
Hypervisor Type :vmware
Hypervisor Name :vmware207
Hypervisor Version :4.1.0
Virtual Switch :vSwitch3
Port groups :
Name :VLAN 3
Vlan Id :138
VIFs:
MAC MTU
00:50:56:92:00:77 8000
Name :VM Network 4
Vlan Id :-
VIFs:
MAC MTU
00:0c:29:4f:66:19 8000
PIFs:
MAC MTU
00:26:55:dd:01:4f 8000
Virtual Server Networking CLI 156