Service Manual

NOTE: In the show virtualswitch output, VLAN 1 displays as VLAN ID 1;
VLAN 4095 displays without a VLAN ID as "-".
show vmmap
Displays the virtual machines accessed on a switch interface.
S4810, S4820T, S5000, and MXL Switch
Syntax
show vmmap interface
Parameters
interface
Display information on the Hypervisor session established on a
specified interface. Enter one of the following interface types:
• For a 100/1000 Ethernet interface or 1-Gigabit Ethernet
interface, enter GigabitEthernet slot/port.
• For a 10-Gigabit Ethernet interface, enter
TenGigabitEthernet slot/port.
• For a port-channel interface, enter port-channel
number. Valid port-channel numbers are from 1 to 128.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Introduced on the S5000.
9.2(0.0) Introduced on the MXL switch.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage Information
The show vmmap command displays information on the virtual machines accessed on
a switch interface, including the virtual machine name, VMAC address, and
corresponding VLAN ID.
Example
Dell#show vmmap gigabitethernet 0/32
VM Name VIF Vlan ID
Virtual Server Networking CLI 157