Service Manual

Sample BGP Configurations

The following are the sample BGP configurations via REST API.

Figure 3. BGP Topology

The PDU structure for configuring the IP address on an interface is as follows:

cat ipaddr_config_put.xml

<name>tengig-0-0</name>

<ip>

</primary>

</address>

</ip>

</interface>

The following configuration depicts the IP address configuration for router interfaces via REST– PUT request:

curl -v -u admin:admin http://10.16.151.159:8008/api/running/dell/interfaces/

interface/tengig-0-0 -X PUT -T ipaddr_config_put.xml

* About to connect() to 10.16.151.159 port 8008

* Trying 10.16.151.159... connected

* Connected to 10.16.151.159 (10.16.151.159) port 8008

* Server auth using Basic with user 'admin'

> PUT /api/running/dell/interfaces/interface/tengig-1-37 HTTP/1.1

> Authorization: Basic YWRtaW46YWRtaW4=

> User-Agent: curl/7.15.5 (i686-redhat-linux-gnu) libcurl/7.15.5 OpenSSL/0.9.8b

zlib/1.2.3 libidn/0.6.5

> Host: 10.16.151.159:8008

> Accept: */*

> Content-Length: 171

> Expect: 100-continue

< HTTP/1.1 100 Continue

< Server: ConfD/5.2

< Allow: GET, POST, OPTIONS, HEAD

< Content-Length: 0

< HTTP/1.1 204 No Content

REST API 162