Service Manual

| +--:(host)
| +--rw destination-host? dell:ipv6-address
+--rw acl-filters-qos
+--rw filter-type? dell:acl-rule-types
+--rw protocol dell:ipv6-protocols-qos
Interface
The following definition configures and displays the properties of an Interface:
Module: INTERFACE
URI:
/api/running/dell/interfaces/interface
Methods
Supported:
GET, POST, PUT, PATCH, and DELETE
NOTE: The POST and DELETE operations are not supported on Physical
Interfaces.
Use the following formats for various interface types:
1 Physical Interface:<iftype>-<slot>-<port>
• The <iftypes> can be any of the following physical interface type:
• TenGigabitEthernet
• fortyGigE
• GigabitEthernet
• TwentyfiveGigabitEthernet
• FiftyGigabitEthernet
• HundredGigabitEthernet
• peGigabitEthernet
• Example: tengig-0–0, fortygig-0–48, gige-1–10, twentyfivegig-1–3–1,
fiftygig-1–5–1, hundredgig-1–2–1, pegig-1–2–2
.
• Management: mgmt-<slot>-<port>
Example: mgmt-5–0
2 Logical Interface: <iftype>-<number>
• The <iftype> can be vlan, port-channel, loopback, or management.
• VLAN: vlan-<number>
Example: vlan-10, vlan-1024
• Port–channel: portchan-<number>
Example: portchan–10
• Loopback: loopback-<number>
REST API 178