Service Manual

+--ro dest-ip-filter? acl-incoming-address-filter-types
+--ro dest-ip-address? inet:ipv4-address
+--ro destination-mask? inet:ipv4-address
+--ro dst-operator? ip-acl-operators
+--ro dstport? uint32
+--ro dstportrange? layer4-port-range
+--ro ack? boolean
+--ro fin? boolean
+--ro psh? boolean
+--ro rst? boolean
+--ro syn? boolean
+--ro urg? boolean
+--ro count-type? acl-rule-count-types
+--ro egress-count-value? uint32
+--ro ingress-count-value? uint32
+--ro log? boolean
+--ro monitor? boolean
+--ro order? uint32
+--ro dscp? uint32
+--ro ecn? uint32
+--ro fragments? boolean
System
Use the following definition to display the System entries:
Module: STATS
URI:
/api/operational/dell/stats/system
Methods
Supported:
GET
System Model
+--ro mac-address? yang:phys-address
+--ro reload-type? reload-type
+--ro next-boot? reload-type
+--ro units* [unit-id]
| +--ro unit-id uint32
| +--ro unit-role? string
| +--ro unit-status? string
| +--ro unit-next-boot-status? string
| +--ro required-type? string
| +--ro current-type? string
| +--ro master-priority? int32
| +--ro hardware-revision? string
| +--ro os-version? string
| +--ro num-ports? uint32
| +--ro up-time? string
| +--ro jumbo-capable? boolean
| +--ro poe-capable? boolean
| +--ro fips-mode? boolean
| +--ro boot-flash? string
| +--ro memory-size? uint32
| +--ro temperature? int32
| +--ro voltage? voltage-status
| +--ro serial-number? string
| +--ro part-number? string
REST API 205