Service Manual

00:02:56: %STKUNIT0-M:CP %BMP-5-BMP_RELEASE_HEADER_INFO:
Flash A Image Main Version : 0
00:02:56: %STKUNIT0-M:CP %BMP-5-BMP_RELEASE_HEADER_INFO:
Flash A Image Patch Version : 1216
b If the Dell Networking OS image versions are different, the system stores the downloaded Dell
Networking OS image in local flash memory and loads the Dell Networking OS image from flash.
This process repeats until the Dell Networking OS image versions match.
The system looks for the configuration file on the file server. If the system does not find a configuration file,
the download fails. If the Dell Networking OS image processing is successful, BMP stops. If the Dell
Networking OS image download also fails, the current offer is treated as invalid and BMP tries to send
DISCOVER messages.
Reload with a DHCP Server Offer Without a DNS
Server
To reload the Dell Networking OS on a switch using a pre–configuration script, the following must be true:
• BMP is enabled.
• The download of the script is from an external server and the location is specified in the DHCP offer.
• The first line of the script contains one of the following:
#!/usr/bin/expect
#!/usr/bin/tclsh
#!/usr/bin/zsh
• If you installed the SmartScripts package, the Dell Networking OS also supports pre–configurated scripts
in Perl, Python, and Ruby.
#!/usr/pkg/bin/perl
#!/usr/pkg/bin/python
• After the first line, but before the start of the script, the script contains the signature #/DELL-
NETWORKING.
• The pre–configuration script downloads instead of the configuration file.
• The pre–configuration script runs before applying the start-up configuration file.
• The pre–configuration script can use the Dell Networking OS CLI commands using the f10do utility.
• When the pre–configuration script completes, the start up configuration file automatically applies.
If a pre–configuration script file downloads successfully, the following SYSLOGs display:
00:03:07: %STKUNIT0-M:CP %BMP-2-BMP_DOWNLOAD_START: The config
file download has started.
00:03:19: %STKUNIT0-M:CP %BMP-5-BMP_DWNLD_FILE_IS_SCRIPT_FILE:
The downloaded file is a script file.
00:03:19: %STKUNIT0-M:CP
%BMP-5-BMP_DWNLD_CONFIG_SCRIPT_SUCCESS: The config/script file
download is successful.
00:03:21: %STKUNIT0-M:CP %BMP-5-BMP_PRE_CONFIG_SCRIPT_BEGIN:
The Pre-Config Script has started to Execute.
After the pre–configuration script executes successfully, the startup configuration file loads.
00:04:30: %STKUNIT0-M:CP %BMP-5-BMP_PRE_CONFIG_SCRIPT_END:
Pre-Config script completed with return status 0.
00:03:03: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface
Bare Metal Provisioning 28