Service Manual

relay
Allows you to configure the addition of option 82 in DHCP client packets.
S4810, S4820T, S3048–ON, S3100 series,
S4048–ON, S5000, S6000, S6000–ON, S6100–
ON, Z9100–ON, Z9500, C9010, IOA, and MXL
Syntax
relay { enable | disable | remote-id { hostname | MAC | Word }}
To reset the options 82 information, use the no relay { enable | disable |
remote-id { hostname | MAC | Word }} command.
Parameters
enable
Enable the option 82 in BMP. The default value is the MAC
address.
disable
Disable the option 82 in BMP.
remote-id
{ hostname |
MAC | Word }
Enter the keyword remote-id, then the hostname or chassis
MAC address or a text string to set as the remote ID in option
82. The default is the remote MAC ID for option 82.
Defaults none
Command Modes RELOAD-TYPE CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduces on the S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON,
Z9000, Z9500, IOA, and MXL.
Bare Metal Provisioning CLI 52