Service Manual

Version Description
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.6(0.0) Introduced on the S5000.
9.5(0.1) Introduced on the Z9500.
9.3(0.0) Introduced on the S6000.
9.2(0.0) Introduced on the MXL Switch.
9.1(0.0) Introduced on the Z9000 and S4810.
8.3.19.0 Introduced on the S4820T.
Usage Information
To upgrade any NVRAM changes to the chassis caused by the following CLI
commands, use the reload conditional nvram-cfg-change command on a
switch running BMP.
• stack-unit {unit} stack-group
• stack-unit {unit} port {fanout-portid} portmode quad
• asf-mode
• cam-acl
• buffer-profile
reload-type
Allows you to configure the reload-type options in reload-type sub command mode.
S4810, S4820T, S3048–ON, S3100 Series,
S4048–ON, S5000, S6000, S6000–ON, S6100–
ON, Z9100–ON, Z9500, C9010, IOA, and MXL
Syntax
reload-type
Defaults BMP
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Bare Metal Provisioning CLI 54