Service Manual

Version Description
8.3.10.0 Introduced on the S4810.
Usage Information
To check the currently configured Auto-Configuration mode (BMP or Normal reload)
on a switch running BMP, use the show reload-type command.
To display the current reload mode for BMP, use the show bootvar or show system
brief
commands. The show bootvar command includes the path of the Dell
Networking OS image file retrieved from a DHCP server when BMP is running, but not
after you exit BMP.
Example
Dell#show reload
reload-type : bmp [Next boot : bmp]
: enable
config-scr-download : enable
dhcp-timeout : 1
vendor-class-identifier : Device 609
retry-count : 3
Dell#
Related
Commands
reload-type — allows you to configure the reload-type options in reload-type sub
command mode.
stop bmp
To prevent an infinite loop, stop the switch from reloading in BMP mode.
S4810, S4820T, S3048–ON, S3100 series,
S4048–ON, S5000, S6000, S6000–ON, S6100–
ON, Z9100–ON, Z9500, C9010, and MXL
Syntax
stop bmp
NOTE: This command replaces the stop jumpstart command.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Bare Metal Provisioning CLI 62