Service Manual

vendor class identifier
Allows you to configure the optional vendor class identifier for DHCP option 60.
S4810, S4820T, S3048–ON, S3100 series,
S4048–ON, S5000, S6000, S6000–ON, S6100–
ON, Z9100–ON, Z9500, C9010, IOA, and MXL
Syntax
vendor-class-identifier description
To reset the vendor-class-identifier option, use the no vendor-class-identifier
description command.
Parameters
vendor-class-
identifier
description
Enter the keyword vendor-class-identifier, then a brief
description for the user-defined field in option 60. The
maximum is 64 characters long. The user string is appended
with Type, Hardware, Serial Number, Service Tag and OS
Version.
Defaults none
Command Modes RELOAD-TYPE CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0P1) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON,
Z9000, Z9500, IOA, and MXL.
Bare Metal Provisioning CLI 64