Service Manual

Related
Commands
• reload-type — allows you to configure the reload-type options in reload-type sub
command mode.
• show reload-type — displays the current Reload mode (BMP mode or Normal
mode).
verify
Validates the software image on the flash drive after the image transfers to the system but before the image
installs.
S4810, S4820T, S3048–ON, S3100 series,
S4048–ON, S5000, S6000, S6000–ON, S6100–
ON, Z9100–ON, Z9500, C9010, IOA, and MXL
Syntax
verify {md5 | sha256} [flash://] img-file [hash-value]
Parameters
md5 MD5 message-digest algorithm.
sha256 SHA256 Secure hash algorithm.
[flash://] flash (Optional) Specifies the flash drive. The default is to use the flash
drive. Enter the filename of the image.
img-file Enter the name of the Dell Networking software image file to
validate.
hash-value (Optional) Specify the relevant hash published on the Dell
support page.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.9(0.0) Introduced on the C9010.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0P1) Introduced on the Z9100–ON.
Bare Metal Provisioning CLI 65