Owner's Manual

7 | About this Guide
www.dell.com | support.dell.com
1
About this Guide
Objectives
This document describes the components and uses of the Open Automation
Framework designed to run on the Dell Networking Operating System (OS),
including:
• Bare Metal Provisioning (BMP)
• Smart Scripting
• Virtual Server Networking (VSN)
• Representational state transfer (REST) application programming interface (API)
• Web graphic user interface (GUI) and HTTP Server
Audience
This document is intended for data center managers and network administrators
responsible for virtualization or system management. It assumes basic knowledge
about virtualization technology and networking.
Supported Platforms and Required Dell
Networking OS Versions
The Open Automation release is supported on the following Dell Networking
switches and minimum Dell Networking OS versions.
• S4810 switches require Dell Networking OS version 8.3.10.1 or later.
Note: Although this document contains information on protocols, it is not intended to
provide complete information on protocol configuration and usage. For this
information, refer to the document listed in Related Documents and the IETF
Requests for Comment (RFCs).