Service Manual

and reloads using that image. If the Dell Networking OS image on the server is the same image, the

system loads the configuration file, if present, or the startup-config without downloading a new image.

Domain Name Server Settings

To determine the host name applied in the switch startup configuration, when no configuration file is

retrieved from the DHCP server, set up a domain name server (DNS).

The DNS is contacted only when no configuration file is contained in a DHCP server response and the

host name is not resolved from the network-config file on the switch.

BMP MIB Support

The Management Information Base (MIBs) and the corresponding configurations are as follows:

MIB OID Value and Functionality

1.3.6.1.4.1.6027.3.2

3.1.1

1 or 2 (BMP or Normal reload-type)

1.3.6.1.4.1.6027.3.2

3.1.2

1 or 2 (Enable or Disable auto-save option)

1.3.6.1.4.1.6027.3.2

3.1.3

1 or 2 (Enable or Disable config-scr download option)

1.3.6.1.4.1.6027.3.2

3.1.4

0 - 50 (DHCP timeout value config)

1.3.6.1.4.1.6027.3.2

3.1.5

0 - 50 (Set BMP Retry count )

1.3.6.1.4.1.6027.3.2

3.1.6

String (Set the vendor-class identifier values up to a maximum of 60 characters)

1.3.6.1.4.1.6027.3.2

3.1.7

1 or 2 (Enable or Disable relay option)

1.3.6.1.4.1.6027.3.2

3.1.8

String (Set the mac/hostname/custom-string as remote-id option in DHCP offer

option 82)

Bare Metal Provisioning