Service Manual

To reset the options 82 information, use the no relay { enable | disable |
remote-id { hostname | MAC | Word }} command.
Parameters
enable
Enable the option 82 in BMP. The default value is the MAC
address.
disable
Disable the option 82 in BMP.
remote-id
{ hostname |
MAC | Word }
Enter the keyword remote-id, then the hostname or
chassis MAC address or a text string to set as the remote ID
in option 82. The default is the remote MAC ID for option
82.
Defaults none
Command Modes RELOAD-TYPE CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P2) Introduced on the S3048–ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, Z9000, Z9500, IOA, and MXL.
Related
Commands
• reload-type — allows you to configure the reload-type options in reload-type
sub command mode.
• show reload-type — displays the current Reload mode (BMP mode or Normal
mode).
reload conditional nvram-cfg-change
After saving the BMP configuration, to perform a reload on the chassis due to configuration changes that
changes the NVRAM content, use this command.
S4810, S4820T, S3048–ON, S5000, S6000, S6000–ON, Z9500, and MXL
Switch
Syntax
reload conditional nvram-cfg-change
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
44
Bare Metal Provisioning CLI