Service Manual

Version Description

9.5(0.1) Introduced on the Z9500.

9.3(0.0) Introduced on the S6000.

9.2(0.0) Introduced on the MXL Switch. Updated the parameters for

S4810, S4820T, and Z9000.

9.1(0.0) Updated the command mode from EXEC Privilege to

GLOBAL CONFIGURATION. Updated the parameter from

jumpstart to bmp. Added support for the config-scr-

download and user-defined-string commands.

Supported platforms are S4810, S4820T, and Z9000.

9.0.2.0 Introduced on the S6000.

9.0.0.0 Introduced in Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.1.0 Introduced on the S4810.

Commands

• show reload-type — displays the current Reload mode (BMP mode or Normal

mode).

• stop bmp — stops the BMP process and prevents a loop if the DHCP server is

not found.

retry-count

Allows you to configure the number of retries for downloading the Dell Networking OS image and

configuration file.

S4810, S4820T, S3048–ON, S5000, S6000, S6000–ON, Z9500, IOA, and MXL

Syntax

retry-count number

To reset the number of retries, use the no retry-count number

Parameters

retry-count

number

Enter the keyword retry-count, then the number of times

to retry downloading the Dell Networking OS image,

configuration file, or script file from the DHCP / file servers,

if the servers are not reachable. The retry limit is from 0 to 6.

If the retry limit is 0, no retry performs. The default is 0.

Defaults none

Command Modes RELOAD-TYPE CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Bare Metal Provisioning CLI